Price and configuration
Generator price
The price of a diesel generator depends on output, configuration, duty type and the required equipment. For most projects there is no universal price list — instead, an individual quotation is prepared for the specific project.
- Output and configuration
- Standby vs continuous duty
- Canopy and acoustics
- Individual quotation
Individual solutions
Why there is no universal generator price list
A diesel generator is not a standardised product with a single fixed list price. A standard generating set can be purchased as a defined model; the complete installation, however, is always designed according to the specific application, duty and installation conditions — and the price of the project follows that configuration.
Two generators of the same output can differ in price by tens of percent — depending on whether they are canopied or open, whether they are intended for standby or continuous duty, what equipment is required and how demanding the installation is.
For this reason we do not publish an indicative price table. Instead, we prepare a concrete quotation based on your project — without obligation and free of charge.
Same output, different configuration
A canopied generator for outdoor installation is more expensive as equipment than an open unit for a machine room — and the total installed project cost depends on the whole configuration.
Standby vs continuous duty
The same generating set may have different standby, prime and continuous ratings. The required duty and rated output must match the application; the quotation follows the selected model and configuration.
Prices change over time
Component, transport and production-availability prices change — a fixed price list would be misleading.
Configuration parameters
What most influences the price of a generator
Each of the following parameters can significantly change the final price — up or down. That is why we always determine the price only after the specific configuration has been clarified.
Required output
Output in kVA is the basic parameter — it fundamentally affects the price of the machine, its engine and alternator. A correctly sized output reduces both purchase and operating costs.
Canopied or open configuration
A generator in a sound-attenuated canopy is more expensive as a machine than an open unit. The canopy reduces noise and helps protect against weather — for outdoor or noise-sensitive installations it is usually necessary.
Standby or continuous duty
The same generating set may carry different ESP, PRP and COP outputs. Choose the rating and model appropriate for the actual duty; the price follows the actual model and configuration.
Tank size and runtime
How long the generator can run without refuelling depends on the load and the tank size. An enlarged or separate external tank for longer operation changes the total cost of the solution.
ATS and automation level
An automatic transfer switch, control system, remote monitoring or synchronisation of several units — items that differ from project to project.
Noise requirements
Lower noise emissions require a more massive canopy or a special acoustic design. For installations near residential areas or indoors this is a key parameter.
Installation method
A turnkey installation includes transport, foundations, wiring, commissioning and testing. The scope of work depends on the location, accessibility and technical requirements of the project.
Additional equipment
Synchronisation panels, changeover boards, container versions, extended warranties or service contracts — every choice changes the final price individually.
Market factors
Why generator prices change over time
Prices of industrial generators are not stable. They move with global supply conditions, production availability and logistics. That is a further reason why publishing a fixed price list makes no sense — quotations are always prepared on current terms, with their validity stated in the document.
Component prices
Engines, alternators and control systems are purchased on the global market.
Production availability
Manufacturer capacity and delivery terms vary with current demand.
Transport and logistics
Transport costs depend on distance, mode of transport and timing.
Materials and currencies
Prices of steel, copper and electronics are reflected in the price of the final machine.
Process
How to get an exact price for your project
An exact price can be set only after the basic requirements and configuration have been clarified. The whole process is fast and non-binding — we do not need technical drawings or detailed documentation to start.
We respond to every inquiry within one working day. How quickly a detailed design and quotation follow depends on the complexity of the project and the scope we agree together.
- 01
Clarify the use
Standby, continuous operation or off-grid? What is the intended application?
- 02
Determine the output
Analysis of the connected load, starting currents and future expansion.
- 03
Define the configuration
Canopy, tank, ATS, version, noise level, accessories.
- 04
Individual quotation
On the basis of the brief we prepare a concrete quotation with an exact price.
Related pages
Czech projects — scope as agreed
For Czech projects the delivery may include, as agreed: generator supply, design of the installation, commissioning on a prepared site, turnkey realization and a service contract. The scope is always clarified together during consultation and confirmed in the quotation.
International supply — EXW CZ/NL
International direct sales are preferably EXW Czech Republic / Netherlands; transport is agreed individually. Installation and service abroad are possible in agreed cases and are always confirmed individually by location and model. Manufacturer warranty.
Want to know the price of a suitable solution?
We will prepare a non-binding quotation according to the output, duty type and required configuration of the generator.